As all of us understand, the yard pellet maker is called for the smooth surface of the feed created, the high hardness of the pellets, and also the internal curing, which can improve the nutrient absorption of pets. According to various basic materials, pellets that can be consumed by livestock are directly produced via the pressing of the yard pellet equipment.

However, throughout a recent return visit to an old customer, our team located some issues brought on by incorrect use of the lawn pellet equipment. The following are a couple of problems as well as solutions that Richi Equipment has put together for you.

Related post：grass pelletizer

( 1) Are the generated pellets curved and cracked?

Factor: This circumstance is usually triggered by the pellets leaving the yard pellet device. When the setting of the cutter is changed farther from the surface area as well as the knife side is dull, the pellets are damaged or torn by the cutter instead of being squeezed out from the die opening. Cut off, currently some pellets are bent to one side and also many splits appear beyond. During the process of going into the colder for cooling or transport, the pellets often tend to break from these fractures, causing excessive pellet powder generated.

Improvement approach:
a. Increase the compression proportion of the mold and mildew, thus increasing the thickness and firmness of the pellets.
b. Grind the raw materials finer to raise the density of pellets as well as avoid the feed from being loose.
c. Readjust the range between the cutter and also the die surface area or replace the cutter with a sharper one.

Related post：https://www.pellet-richi.com/wood-pellet-machine/grass-alfalfa-pellet-machine.html

( 2) Is the surface of the pellets unequal?
This circumstance is that the powder used for granulation contains resources with big pellets that have actually not been crushed or semi-crushed. Due to insufficient conditioning during the yard pellet device conditioning procedure, the pellets are fairly difficult and reasonably huge. After going through the mold of the grass pellet equipment, when the pores are not well integrated with various other raw materials, the pellets appear irregular.

Enhancement technique: effectively control the thickness of powdered feed, to ensure that all basic materials can be fully softened throughout conditioning; for resources including more fiber, heavy steam bubbles are quickly combined, so do not include way too much to this formula. lots of steam.

( 3) Is the color of specific pellets or pellets irregular?

This circumstance prevails in the manufacturing of aquafeed, primarily shown up in that the shade of private pellets squeezed out from the grass pellet machine is darker or lighter than that of other regular pellets, or the surface area shade of a solitary pellet is inconsistent, thus impacting the appearance top quality of the entire set of feed.

Improvement technique: primarily to regulate the blending harmony of each element in the formula as well as the mixing uniformity of the added water; boost the toughening up performance, manage the tempering temperature if required, as well as utilize a lower tempering temperature level to lower the color adjustment; Control the return material. For solutions that are prone to ” unequal color”, try not to make use of the return material to straight granulate. The return product need to be blended with the raw products and afterwards smashed again. The mold with ensured high quality is used to control the dimension of the die hole. End up, sand the die opening if required prior to use.

Related post：lucerne pellet mill machine

2. Functioning concept of RICHI turf pellet maker

Ring die grass pellet device is among the main tools of RICHI lawn pellet feed production line, the feed from powder state to pellet development must be completed with 4 locations:
( 1) The product is transferred to the modulator via the speed-regulating feeding auger. In order to acquire great granulation advantages ( boost output as well as high quality), after adding hot heavy steam for conditioning, the product is brought near the ring die cover and also the inner wall surface of the die (feeding area) by gravity as well as centrifugal force produced by the rotation of the ring die.
( 2) Under the action of the reducing knife, the wedge-shaped area (compression zone) created by each pushing roller as well as the ring die is fed uniformly as well as constantly.
( 3) Because the space between the functioning surface area of the outer wall of the pressure roller and the functioning surface of the internal size of the ring die is just 0.1-0 .3 mm, and also the gap is basically horizontal, a specific extrusion pressure (extrusion area) is formed.
( 4) As a result of the feeding, under the strong extrusion in between the die as well as the roller, the product is compressed, pressed right into the die opening, and developed in the die hole ( developing zone).
The material constantly enters journalism area, is extruded and continually squeezed out from the die hole, and is cut into various desired pellet lengths from the distance in between the flexible knife side and the outer wall surface of the ring die.

resource

3. What is the factor for the various dimensions of feed pellets?

Feed equipment and tools is a sort of equipment for handling feed. It is commonly invited by individuals for its distinct advantages. Nevertheless, in use, different sizes are prone to occur. Right now, we require to resolve it reasonably. Before addressing, we need to comprehend the distinction. The factor for the size is to bring convenience to our usage, so what are the factors for the various dimensions of the feed pellet machine?

( 1) Feeder blade. Equipment: The development of feed pellets mainly depends on the rolling of the pellet device equipment and also the cutting of the moving blade. As soon as the equipments or blades may cut the feed pellets with unequal thickness as well as length.

( 2) Motor: The electric motor outfitted with the feed pellet maker is a electric motor appropriate for its ranked power. Once it is damaged throughout operation or the running power is unsteady, it can not be pelletized or pelletized unevenly.

( 3) Operation: Because of the irregular operation of the operator, the pellet feed processing machinery will certainly also create irregular pellets. As an example, pellet powder includes a lot of water, to make sure that feed pellets do not develop, as well as cold cracks might be developed. If this takes place, drivers need to calmly assess, figure out the factors, as well as make up for it in time, so as not to affect the outcome worth of pellets as well as trigger equivalent financial loss.

When feeding the yard pellet device, we must pay attention to different feeding dimensions, since different feeding sizes are not just easy to cause devices obstruction, but likewise easy to cause equipment damages, thus influencing our regular work, which needs us to utilize, strengthen upkeep, to extend the efficiency of lawn pellet equipment usage.

For details please contact: Richi Machinery
WhatsApp：86 138 3838 9622
Email：enquiry@pellet-richi.com