( 1) Exactly how to make the mold and mildew life longer?

With the constant introduction of timber pelletizer device into the marketplace, the advancement of mechanical devices is also constantly altering. The deterioration of the mold during the manufacturing of wood pellets is additionally a significant cost. So, how to preserve it straight affects the service life of the wood pellet making machine. Therefore, it likewise straight influences the handling cost of timber pellets. Exactly how to make the mold and mildew life of the wood pelletizer maker device longer? Get your answer today!

Related post: wood pelletizer machine

① Consistently clean oil and also fill

If the wood pelletizer equipment is not used for a month, it is advised to clean up the oil inside, so the oil will progressively set during long-term storage space, which will certainly make it tough to eliminate the next time it is utilized, which will seriously influence the succeeding use the mold and mildew of timber pelletizer device.

After the pellets are refined, it is necessary to make use of oil to grind for a period of time to make sure that all the oil stays in the die hole, which is of terrific benefit to the work the next day as well as is also conducive to the lasting use of the die. The oil can be mixed with waste engine oil and also wood chips. It can be made as soon as as well as can be recycled.

Related post: wood pellet processing plant

② No requirement to clean up the mold and mildew for a long time

If the mold and mildew as well as pinch rollers are no longer made use of for a long period of time, it is suggested to remove the mold after cleaning and storage. The master cleans the sawdust pellets inside the mould and also abides by the mould surface area. In this way, on the one hand, we can protect against the venture from being hard to remove the pellets because of the solidifying of the pellets due to the lasting storage space of the pupils. On the other hand, since the sawdust has water absorption, if the sawdust externally is not gotten rid of, it may speed up the development of the rust of the mold surface area.

③ The mold must be kept in a completely dry and ventilated area

The majority of the mold and mildews of the timber pelletizer machine are made of alloy steel. If they remain in a moist location for a very long time, the surface of the mold may be damaged because of air deterioration, therefore greatly minimizing its life span.

Related post: 2-2.5T/H Wood Pellet Plant in Germany

④ The managing process must beware

The mold of the wood pelletizer equipment is a high-precision part, as well as the mold hole is carefully processed according to the compression proportion of the mold and mildew. If you are careless throughout the dealing with procedure, the structure of the internal wall of the mold opening is harmed, which might lead to molding during handling. reduced price and short service life.

The above are the ideas on exactly how to make the mold and mildew life much longer for timber pelletizer maker Comply with these 5 techniques to keep the mold and mildew, and also I believe your mold and mildew will last much longer.

Related post: sawdust pelletizer

( 2) Why do the pellets created by the wood pellets equipment have a bad look?

Why do the pellets generated by the wood pellet mill maker look bad? Today we will learn why. Throughout the manufacturing of wood pellet gas by the wood pellet manufacturing maker, there will certainly be a circumstance where the pellets contain powder as well as have a harsh surface. Right now, it is likewise needed to examine the equipment data setups of the timber pelletizer device. Besides, what is the reason for this sensation?

Related post: automatic cat litter machine

Wood pellets trigger more wood pellet powders, this feedstock can be caused by reduced dampness content, the dampness material of wood pellet maker feed is normally between 12% as well as ~ 15%. After changing the moisture material of the raw material, the problem still exists, that is, the pressure roller die is seriously put on. When the internal surface area of the ring die of the wood pelletizer equipment is badly put on or the fragment diameter needs to be changed, it requires to be replaced. The surface of the sawdust pellets is harsh, which may be brought on by the extreme dampness material of the raw product, or the first use the mold. This trouble can be fixed by changing the wetness content of the raw material, or by repeatedly grinding the mold with the material.

To summarize, the reasons why the pellets created by the timber pelletizing maker are bad in appearance are pointed out today. I hope it will aid you when you make use of the timber pellet equipment again. Throughout the years, Richi Equipment has focused on the r & d as well as manufacturing of timber pelletizer equipment makers, biomass pellet machines, sawdust pellet devices, fuel pellet equipments, wood handling equipment, drying equipment, cooling down equipment as well as product packaging devices.

Related post: biomass pellet plant manufacturers

( 3) Advised timber pellet device.

There are lots of timber pellet mill device on the marketplace. Today, Richi Equipment will certainly recommend some of them:

① The first kind of tiny timber pelletizer device
It is a brand-new sort of biomass power equipment individually established by our firm’s technological personnel and also has independent intellectual property civil liberties. The wood pelletizer device is straightforward in framework, simple to operate, steady in operation, and can work constantly. The pressed pellets have the advantages of high density, high combustion worth, reduced moisture and also low ash web content. The timber pellet equipment device transmission takes on high-precision gear transmission, four sets of equipments are connected, as well as the hydraulic oil shipment system can immediately distribute oil between the gearbox and also the primary shaft bearing. The service life of the main shaft as well as transmission equipments.

The functioning parts of the timber pelletizer maker die plate, stress roller) are constructed from alloy steel, and the hardness after heat treatment can reach more than 50, which makes certain the continuous operation of the maker as well as lengthens the life span of the whole timber pelletizer device The digital control system of the major engine takes on the international basic setup of star-delta beginning, as well as the operation is exceptionally stable.

More details: https://www.pellet-richi.com/wood-pellet-machine/wood-pellet-mill.html

② The second kind of tiny wood pelletizer machine.

Primarily ideal for granulation of crude fibers, such as corn stalks, sawdust, rice husks, cotton stalks, cottonseed husks, weeds and also other plant stalks and also factory wastes. It appropriates for reduced temperature level granulation of organic microbial fertilizer, natural plant food as well as compound fertilizer.

Attributes of this timber pelletizer device:

① The stress rollers are evenly distributed, and the operation is secure. At the same time, journalism location is boosted, as well as the manufacturing performance is boosted.

② The screw center pressure managing framework is embraced, and also the wood pelletizer device mold and mildew gap can be big or small, which is suitable for various products to make certain the important effect.

③ This version is geared up with Φ6-Φ10mm diameter mold and mildews, which appropriate for granulation of various products as well as accomplish the most effective advantage.

For details please contact: Richi Machinery
WhatsApp：86 138 3838 9622
Email：enquiry@pellet-richi.com