The price of the biomass pellet production line is identified by the raw materials utilized. For instance, if the raw products are branches and trunks with high dampness content, they need to be broken – smashed – dried – granulated – packed – delivered. It mainly relies on what basic materials are utilized. 350 kind biomass pellet device equipment 38,000, model: 350 kind 300 ~ 500 kg per hour, 450 kind 500 ~ 800 kg, 560 kind 1 ~ 1.5 bunches, 600 type 2 bunches, 850 kind 3 ~ 4 loads.

The great selling in Indonesia completely biomass pellet assembly line rate relies on your resources as well as outcome dimension. First off, you require to recognize what your resources are. The raw materials are ready-made sawdust or wood chips as well as the dampness content of the products is 10%-15%. A factory provided brand-new modern technology timber pellet machine suffices. If your basic materials are unrefined logs, branches, etc need to be pulverized by a timber chipper and also biomass crusher, after that dried out in a dryer (if the wetness surpasses 15%, it needs to be dried), after that the major equipment is granulated, and afterwards the packaging maker loads this collection of production lines.

Related post: Indonesia biomass pellet production line

Understanding your raw materials has to do with the output. The output of the biomass pellet mill device is various as well as the version is different, so the cost is likewise various. The biomass pellet production line price is not only a issue of reporting a number, yet it is necessary to create a strategy and quotation according to your requirements.

Firstly, the raw material moisture needs of timber pellets are very stringent. The dampness web content of the product is too expensive, which obstructs the die holes, so that the bits can not be generated; if the dampness web content of the product is also reduced, if it is also dry, it is hard to create, and also the viscosity is insufficient.

Related post: wood pellet mill

Usually 12%-13%, 15-20% of the raw material moisture after inflection is the standard for pressing wood pellets. If the raw material dampness is too high, the mold resistance and also slipping sensation will certainly happen after the raw material gets in the biomass pelletizer ring die; take note of control the wetness web content of the raw product prior to going into the biomass pelleting maker, If the water material is too expensive, there will be slippage in the ring die, causing the sensation that it is difficult to release.

Related post: biomass pellet mill

If your raw material moisture satisfies the requirements, a biomass timber pellet press machine can produce wood pellets. If it does not satisfy the needs, it needs to be dried out, so it needs to be equipped with a timber dryer as well as a warm blast cooktop. Obviously this is if your basic material is timber chips. If your resources is timber chips (thickness less than 0.5 mm), it requires to be crushed, which amounts including an additional procedure. Some consumers’ resources are bark, which is also feasible after including a wood pulverizer.

Related post: 5T/H wood pellet factory in Austria

Nonetheless, some clients’ raw materials are wood scraps, because the price of wood scraps is cheap and very easy to acquire, so there are several cases, after that it is necessary to add a timber chipper, first to reduce the non-standard timber scraps right into wood chips, and then most likely to crush.

For some clients whose raw materials are waste building layouts, it is necessary to alter the timber chipper to a bamboo plywood crusher.

Due to the fact that the bamboo plywood itself has several iron nails, it is really easy to harm the blade on the timber chipper when using a timber chipper. One more reason is that the waste structure template is relatively broad, and also the feed port of the timber chipper is usually 1250px.

More details: https://www.pellet-richi.com/wood-pellet-machine/biomass-pellet-production-line.html

It is difficult to by hand damage it in advance, right? The bamboo plywood crusher can enter any type of bamboo plywood with a feed opening of less than 1.25 m, and the gnawing knife of the bamboo plywood crusher is an ingot blade, as well as the iron nails have little impact on him.

Unlike wood chippers, the blades are quickly harmed. Bamboo plywood is likewise an advantage of making timber pellets. Usually, its dampness web content is extremely little, between 15-20%. For that reason, using bamboo plywood as pellets conserves the problem of timber drying out machines.

For details please contact: Richi Machinery

WhatsApp：86 138 3838 9622
Email：enquiry@pellet-richi.com